TM-9-2320-433-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985E1

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-433-10 - Page 260 of 964

OPERATE CRANE - Continued

be kept below these capacity figures. If the vehicle is not level, load capacities

are reduced when lifting on the low side.

Table 1.

HIAB Material Handling Crane Load Information.

HIAB MODEL 8108

(refer to data plate on passenger side rear fender)

Maximum Capacity at Boom Length of 16.5 ft. (5.0 m):

5400 lbs (2 452 kg)

Maximum Capacity at Boom Length of 20.5 ft. (6.25 m):

4500 lbs (2 043

kg)

Maximum Turning Radius:

340 degrees

Tilt Warning Alarm Initiation:

5 degrees

NOTE

Vehicle may be equipped with either a HIAB model 8108 or

8108-2 crane (refer to crane data plate on passenger side rear

fender). The HIAB model 8108-2 may be equipped with either

an analog remote control system (RCIII M [RCM]) and desig-

nated 8108-2 or a digital remote control system (Combidrive

5000 CD) and designated 8108-2CD. The differences be-

tween models are noted in appropriate areas throughout this

manual.

HIAB MODEL 8108-2/8108-2CD

(refer to data plate on passenger side rear

fender)

Maximum Capacity at Boom Length of 13 ft. (3.97 m):

6800 lbs (3 087 kg)

Maximum Capacity at Boom Length of 20 ft. (6.1 m):

4500 lbs (2 043 kg)

Maximum Turning Radius:

410 degrees

Tilt Warning Alarm Initiation:

7 degrees

e.

When operating the HIAB material handling crane:

(1)

Ensure that all personnel working in the immediate area of the vehicle are

wearing hearing protection during crane operation.

TM 9-2320-433-10

0040

0040-26