OPERATE CRANE - Continued
3
8108/8108-2
8108-2CD
5
4
3
Figure 18.
(4)
Connect remote-control cable (4) to remote-control unit (3).
NOTE
•
If operation of crane via remote-control unit from front remote
station is desired, skip to Step (r).
•
If operation of crane via remote-control unit from rear junction
box is desired, complete Steps (b) through (q).
b.
Disconnect rear remote plug (6), and connect free end of remote-control cable
(4) to rear junction box (7). For 8108-2CD HIAB crane, remove plug weather
cap from remote-control receptacle and connect free end of remote-control
cable (4) to remote-control receptacle (refer to Figure below).
TM 9-2320-433-10
0040
0040-31