TM-9-2320-433-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985E1

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-433-10 - Page 270 of 964

OPERATE CRANE - Continued

NOTE

The operator is able to use the controls one at a time or in pairs to

move the hook or load to the desired position.

j.

Read and carefully follow the above warnings, cautions, and notes for crane

operation.

k.

When crane operation is completed, push remote-control ON/OFF power switch

(8) to OFF position.

l.

Set ENGINE HIGH IDLE ON/OFF switch (1) to OFF position to decrease engine

rpm to idle.

m.

Set remote switch (9) to OFF position. For Model 8108-2CD HIAB Crane, press

power button on power display box, indicator will go out (refer to Figure above).

n.

Disconnect remote-control cable (4) from rear junction box (7) and reconnect

rear remote plug (6) to junction box (7). For Model 8108-2CD HIAB Crane,

disconnect remote-control cable (4) from remote-control receptacle. Install

weather cover on remote-control receptacle (refer to Figure below).

o.

Disconnect remote-control cable (4) from remote-control unit (3).

p.

Return remote-control unit (3) and remote-control cable (4) to stowage

compartment (5).

q.

Move MANUAL REMOTE selector lever (12) to MANUAL position (shown).

TM 9-2320-433-10

0040

0040-36