TM-9-2320-433-10
TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985E1
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-433-10 - Page 455 of 964
WINCH MIRED VEHICLE TO THE REAR - Continued
WARNING
•
Always wear protective gloves when handling winch cable. Never let
cable run through hands. Frayed cables can cut severely. Failure to
comply may result in injury or death to personnel.
•
Never operate winch with less than five wraps of cable on winch
drum. Failure to comply may result in injury or death to personnel.
12.
Move winch shift lever (4) to OUT while assistant pulls winch cable (9) from self-
recovery winch (10) toward rear of vehicle.
NOTE
•
Do not place cable between tensioning device pulleys at this time.
•
When pulling cable through tensioning device, push sheave towards
frame rail to allow clevis to pass through.
13.
Continue to pay out winch cable (9) while assistant routes cable through cable guide
(11).
14.
Continue to pay out winch cable (9) while assistant routes cable through hole (12) in
fender and through roller guide (13).
TM 9-2320-433-10
0083
0083-27
Back to Top
