WINCH MIRED VEHICLE TO THE REAR - Continued
M977 SHOWN
3
10
2
9
4
Figure 27.
18.
If snatch block must be used for self-recovery operation, attach self-recovery winch
cable (9) to snatch block (WP 0084) and connect end of self-recovery winch cable to
mired vehicle left rear towing eye. (WP 0085) Attach snatch block to a tree, another
vehicle, or heavy object refer to FM 4-30.31. (WP 0144)
CAUTION
There must be at least five wraps of cable on winch. If load is applied with
less than five wraps of cable on winch, cable may come loose on drum.
19.
Check that there are at least five wraps of winch cable (9) left on winch (10). If there
are not at least five wraps of winch cable left on winch (10), stop using self-recovery
winch (10) and continue with Step (46) of this procedure.
CAUTION
Do not go over winch pull capacity or winch could be damaged.
TM 9-2320-433-10
0083
0083-29