TM-9-2320-433-10
TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985E1
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-433-10 - Page 462 of 964
WINCH MIRED VEHICLE TO THE REAR - Continued
CAUTION
Do not reel clevis end of winch cable through roller guides. Clevis may
catch on roller guide and cause cable or roller guide to break.
47.
Set PTO ENGAGE switch (2) to ON position. Indicator light (3) will illuminate.
48.
Set winch shift lever (4) to IN.
49.
When end of cable is near rear of vehicle, release winch shift lever (4) to center
position.
50.
Set PTO ENGAGE switch (2) to OFF position. Indicator light (3) will go out.
WARNING
•
Always wear protective gloves when handling winch cable. Never let
cable run through hands. Frayed cables can cut severely. Failure to
comply may result in injury or death to personnel.
•
Never operate winch with less than five wraps of cable on winch
drum. Failure to comply may result in injury or death to personnel.
51.
Pull clevis (7) end of winch cable (9) forward through roller guide (13) and hole (12)
in fender.
TM 9-2320-433-10
0083
0083-34
Back to Top
