TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 594 of 1324

OPERATION - Continued

WARNING

Never drive with LHS NO TRANSIT indicator illuminated. An illuminated

indicator means LHS is not fully stowed. Failure to comply may result in

injury or death to personnel.

NOTE

LHS OVER LOAD indicator will come on when main frame cylinders are

fully extended, or fully retracted and joystick is being activated.

37.

Move joystick (10) to LOAD position and hold in this position until main frame cylinders

(19) are fully retracted.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

38.

Turn hydraulic selector switch (9) to MAN H.A.

NOTE

LHS OVER LOAD indicator will come on when hook arm cylinders are

fully extended, or retracted and joystick is being activated.

39.

Hold joystick (10) in LOAD position until hook arm cylinders (14) are fully retracted.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

40.

Turn hydraulic selector switch (9) to MAN TRANS.

41.

Set PTO ENGAGE switch (7) to OFF position. Indicator light (8) will go out.

42.

Inspect that flatrack is completely seated and load locks (6) are engaged.

TM 9-2320-434-10

0068

0068-14