TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 597 of 1324

OPERATOR MAINTENANCE

TRANSFER FLATRACK FROM TRAILER TO VEHICLE IN MANUAL MODE

INITIAL SETUP:

Not Applicable

OPERATION

CAUTION

There must be sufficient air pressure in trailer air system to retract flatrack

locks, or damage to flatrack lock can occur while attempting to remove

flatrack from trailer. If not, use vehicle to charge trailer air system using

trailer air charging hose. If air system cannot retract flatrack locks, use

manual flatrack lock retract procedure (refer to TM 9-2330-385-14).

(WP 0173)

Ensure air lines and cables are properly stowed to prevent damage to

equipment (refer to TM 9-2330-385-14). (WP 0173)

Ensure that trailer drawbar is down against the ground during transfer

operations, or damage to equipment may result.

1.

Push the knob (1) on trailer to retract flatrack locks (2).

2

1

ENGAGED

Figure 1.

TM 9-2320-434-10

0069

0069-1