TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 847 of 1324
OPERATE LHS USING SLAVE HYDRAULIC SETUP - Continued
TRAILER
AIR SUPPLY
12
10
11
BASE MODEL
Figure 6.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or
damage to equipment may result.
12.
Turn hydraulic selector switch (12) to AUTO.
NOTE
•
Model of vehicle can be determined by information plate on inside of
driver side cabin door.
•
Steps (13) and (14) apply to operable M1120A2 model HEMTT
vehicle only.
•
Skip to Step (15) for operable M1120A4 model HEMTT vehicle.
13.
Set PTO ENGAGE switch (10) to ON position. Indicator light (11) will illuminate.
////////////////////////////////////////////////////////////////////////////////////
TM 9-2320-434-10
0118
0118-5
////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Back to Top
