TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 852 of 1324
OPERATE LHS USING SLAVE HYDRAULIC SETUP - Continued
NOTE
Button may be stiff and hard to push in.
20.
Press and hold free flow valve override button (18). Simultaneously press one or more
of the following buttons to return LHS to the stowed position: hook arm UP (19), hook
arm DOWN (20), main frame UP (21), main frame DOWN (22).
21.
Shut down both vehicles:
a.
Complete Steps (22) through (25) to shut down M1120 BASE model HEMTT
vehicle.
b.
Complete Steps (26) through (29) to shut down M1120A2 model HEMTT
vehicle.
c.
Complete Steps (30) through (33) for M1120A4 model HEMTT vehicle.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or
damage to equipment may result.
NOTE
•
Model of vehicle can be determined by information plate on inside of
driver side cabin door.
•
Perform Steps (22) through (25) to shut down M1120 BASE model
HEMTT vehicle.
22.
Turn hydraulic selector switch (12) to OFF.
////////////////////////////////////////////////////////////////////////////////////
TM 9-2320-434-10
0118
0118-10
////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Back to Top
