TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-435-10 - Page 397 of 1168

OPERATION - Continued

WARNING

Reposition and lock both rear guides after bridge bay retrieval. Failure to

reposition and secure rear guides after bridge bays are loaded could

result in lost bridge bays or vehicle rollover during transport. Failure to

comply may result in injury or death to personnel.

CAUTION

While maneuvering vehicle in the immediate vicinity of the loading or

unloading site, LHS MODE SELECT switch may be in any setting.

However, LHS MODE SELECT switch must be set to OFF/TRANSPORT

prior to road travel, to prevent damage to main frame and hook arm

cylinders.

NOTE

Ensure both front pin lock assemblies are secured to bridge bay pins and

both rear guides are properly locked.

40.

Position WINCH switch (24) to OUT, and release when winch cable tension is

released.