TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-435-10 - Page 457 of 1168

CONFIGURE BAP HOLD-DOWN LOCKS - Continued

Table 2.

BAP Hold-Down Locks Checklist.

- Continued

Load

BAP

From

Ground

(Note 8)

Unload

BAP

to

Groundl

Transport

Mode

(Note 8)

Translo

ad

BAP to

Trailer

Transload

BAP to

Vehicle

(Note 8)

Notes:

1. Refer to figure below for location of BAP hold-down locks on vehicle.

BAP HOLD-DOWN

LOCKS

SHOWN WITHOUT BAP INSTALLED

FOR CLARITY

Figure 2.

2. UP position is locked on the BAP, DOWN position is locked on the LHS

hook arm.

3. Jaw and latch are located on pin locks.

4. Not applicable for empty BAP.

5. IN for empty BAP.

6. Moved to UP position after the BAP is fully loaded onto trailer.

7. Moved to STOWED position after the BAP is fully loaded onto vehicle.

8. Bail bar lock and pin must be installed on LHS hook when BAP is loaded

on LHS.

TM 9-2320-435-10

0052

0052-5