TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-435-10 - Page 450 of 1168

OPERATION - Continued

25.

Set HIGH IDLE switch (17) to ON position.

26.

Move joystick (18) to load and stop when NO TRANSIT indicator (26) goes out.

27.

Set HIGH IDLE switch (17) to OFF.

28.

Push in PARKING BRAKE control (1), or release service brake pedal (2).

29.

Set transmission range selector (3) to D (drive), and move vehicle 10 ft. (3 m) from

trailer.

30.

Pull out PARKING BRAKE control (1), or apply service brake pedal (2).

NOTE

If BAP hold-down locks do not engage, raise the BAP slightly and lower

again. The BAP should seat completely and engage BAP hold-down

locks.

31.

Set PTO ENGAGE switch (15) to OFF position. Indicator light (16) will go out.

32.

Turn LHS MODE SELECT switch (14) to OFF.

33.

Stow curb-side and road-side transload rollers (27):