TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 352 of 1616

TM 9-2320-440-13&P

0037-14

0037

MRP DOES NOT EXTEND (CONTINUED)

THAAD0639

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 19.

Shut off engine (

Remove jumper wires and disconnect THAAD

chassis harness input module gray connector.

Check for continuity across each wire

as indicated in the following table.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

If continuity is not measured on any one wire, notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Wire Number

Connector/Terminal

Connector/Terminal

1901

Gray Connector/P1

MUJB Connector/b

1902

Gray Connector/P2

MUJB Connector/T

1903

Gray Connector/P3

MUJB Connector/R

1906

Gray Connector/P6

MUJB Connector/B

1908

Gray Connector/P8

MJUB Connector/X

1435

Gray Connector/P11

MUJB Connector/A

1461

Gray Connector/P12

MUJB Connector/P

TM 9-2320-347-10)