TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 472 of 1616

TM 9-2320-440-13&P

0048-6

0048

AIR RIDE SUSPENSION RIDE ROUGH OR UNSTABLE (CONTINUED)

THAAD0054

Step 8.

Start engine (

Charge air system to 100 to 120 psi (690 to 827

kPa). Shut off engine (

Inspect two are lines 2106 and fittings from

pressure protection valve to air ride suspension ride height control valves for kinks,

leaks, and damage (see WP 0055).

If air lines leak, or are kinked or damaged, repair leaks or replace damaged

air lines and fittings (WP 0055).

Step 9.

Inspect air line 2865 and fittings from pressure protection valve to left side tire inflation

connector for leaks and damage (see WP 0055).

If air line leaks, or is damaged, repair leaks or replace damaged air line and

fittings (WP 0055).

Step 10.

Connect air hose and pressure gage to left side tire inflation connector.

Check for at

least 65 to 75 psi (448 to 517 kPa) pressure.

If at least 65 to 75 psi (448 to 517 kPa) pressure is not present, disconnect

two air lines 2106 and air line 2865, and fittings (WP 0148); and replace

pressure protection valve TM 9-2320-325-14&P

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)