TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 656 of 1616

TM 9-2320-440-13&P

0079-2

0079

INSTALLATION/ADJUSTMENT

NOTE

•

Both MRP rack lock disengaged proximity switches are installed and adjusted the same

way. Right side shown.

1.

Install two nuts (3) on proximity switch (4).

2.

Install proximity switch (4) into MRP rack lock cylinder (5).

3.

Screw proximity switch (4) in fully until it contacts cylinder rod of MRP rack lock cylinder (5).

4.

Mark proximity switch (4) and then retract proximity switch (4) one complete turn and tighten two nuts (3).

5.

Connect connector (1) to connector (2).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Connect batteries (TM 9-2320-325-14&P).

2.

Check MRP rack lock cylinder operation and verify proximity switch is working properly (WP 0011).

3.

Remove wheel chocks (

END OF TASK

END OF WORK PACKAGE

THAAD0026

TM 9-2320-347-1)0