TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 658 of 1616

TM 9-2320-440-13&P

0080-2

0080

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Loosen two nuts (3) and remove proximity switch (4) from MRP rack lock bracket (5).

3.

Remove two nuts (3) from proximity switch (4).

END OF TASK

INSTALLATION/ADJUSTMENT

NOTE

•

Both MRP rack lock engaged proximity switches are installed the same way.

Right side

shown.

•

Ensure MRP rack lock cylinder is fully engaged.

1.

Install two nuts (3) on proximity switch (4).

2.

Install proximity switch (4) into MRP rack lock bracket (5).

3.

Screw proximity switch (4) in fully until it contacts the cylinder rod of MRP rack lock cylinder (6).

4.

Mark proximity switch (4) and then retract proximity switch 0.13 in. (3.3 mm) and tighten two nuts (3).

5.

Connect connector (1) to connector (2).

END OF TASK)

FOLLOW-ON MAINTENANCE

1.

Connect batteries (TM 9-2320-325-14&P).

2.

Check MRP rack lock cylinder operation and verify proximity switch is working properly (WP 0011).

3.

Remove wheel chocks (

END OF TASK

END OF WORK PACKAGE

THAAD0025

TM 9-2320-347-10)