TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 734 of 1616

TM 9-2320-440-13&P

0095-14

0095

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in a well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

Left and right side clamps are installed the same way.

Left side shown.

15. Apply sealing compound to threads of eight screws (1).

16. Install tube (6) on compression frame (7) with eight clamp halves (5), four cover plates (4), 16 washers (3),

eight lockwashers (2), and screws (1).

17. Repeat steps (15) and (16) to install clamps on right side.

END OF TASK

THAAD0613