TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010
TM-9-2320-440-13-P

  TM-9-2320-440-13-P - Page 727 of 1616

TM 9-2320-440-13&P
0095-7
0095
WARNING
Compression frame is heavy (Aprox. 835 lbs).
Attach a suitable lifting device to compression frame.
Failure to comply may result in serious injury or death to personnel.
16. Attach a suitable lifting device to compression frame (21).
NOTE
•
Left and right side screws are removed the same way.
Left side shown.
•
Some vehicles may have three washers installed on front screws for proper clearance.
17. Remove three locknuts (34), 24 spring washers (35), six or nine washers (36), and three screws (37) from
compression frame (21) and vehicle. Discard locknuts.
18. Remove three locknuts (38) and screws (39) from compression frame (21) and vehicle. Discard locknuts.
19. Repeat steps (17) and (18) for right side.
20. Using lifting device, remove compression frame (21) from vehicle.
21. Remove eight compression frame spacers (40) from vehicle.
22. Remove lifting device from compression frame (21).
END OF TASK
THAAD0612


Back to Top