TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 73 of 552
UNCOUPLING TRAILER FROM PRIME MOVER - Continued
WARNING
•
If load has shifted, make sure it is evenly distributed before removing drawbar coupler
from pintle hook. Failure to comply may result in death or injury to personnel. Seek
medical attention in the event of an injury.
•
Rear stabilizer must be used if trailer is carrying a load. Failure to comply may cause
trailer to tip, resulting in death or injury to personnel. Seek medical attention in the event
of an injury.
8.
Pull out on release handle (Figure 16, Item 2), and lower rear stabilizer (Figure 16, Item 3). Turn foot assembly
(Figure 16, Item 4) until it firmly contacts ground.
9.
Remove safety pin (Figure 16, Item 5) from pintle hook (Figure 16, Item 6).
10.
Pull up on locking latch (Figure 16, Item 1) and open pintle hook (Figure 16, Item 6).
4
3
6
5
2
1
M116_M101_042A
Figure 16.
Uncouple Trailer from Prime Mover.
TM 9-2330-202-13&P
0005
0005-17
Back to Top
