TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 91 of 552
OPERATOR MAINTENANCE
ONE OR BOTH TAILLIGHTS DO NOT WORK
INITIAL SETUP:
References
WP
0005
Equipment Condition
Trailer coupled to prime mover (WP
0005)
TROUBLESHOOTING PROCEDURE
WARNING
When troubleshooting electrical system or electrical components, be certain MASTER switch
is OFF between every step unless otherwise directed. To prevent injury due to electrical
shock, remove all jewelry and metal objects when working on electrical system. Failure to
comply may result in death or injury to personnel. Seek medical attention in the event of
an injury.
SYMPTOM
ONE OR BOTH TAILLIGHTS DO NOT WORK
MALFUNCTION
LIGHT PANEL SWITCH IN PRIME MOVER IN OFF POSITION
CORRECTIVE ACTION
1.
Place the light panel switch in ON position in prime mover.
2.
Verify problem is solved.
MALFUNCTION
INTERVEHICULAR CABLE IS NOT PROPERLY CONNECTED OR SECURED
CORRECTIVE ACTION
1.
Disconnect intervehicular cable plug from prime mover receptacle and reconnect
properly (WP
0005).
2.
Verify problem is solved.
3.
If one or both taillights still do not work, notify Field Maintenance.
END OF WORK PACKAGE
TM 9-2330-202-13&P
0010
0010-1/2 blank
Back to Top
