TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 246 of 462

4-148

TM 9-2330-238-14

4-64. BONNET FRONT DOOR LINKAGE REPLACEMENT (M313 AND M447C).

This Task Covers:

a.

Removal

b.

Installation

Initial Setup:

Materials/Parts:

Tools/Test Equipment:

.

one Iockwasher

●

General mechanic’s tool kit

●

Three cotter pins

a.

REMOVAL I

●

●

●

NOTE

Some M313 models have a connecting link and handle on each side of air

conditioner enclosure. Late model M313 vans have only one on the right.

Early models also have a bonnet register control rod which is attached to the bonnet

connecting Ilnk.

Later models have a pair of slides operated from outside which replace the lower

connecting link.

1.

Open bonnet front door (1) to full open position and support with door support rod (2).

2.

Remove cotter pin (5) and connecting link/control rod (3) from door angle bracket (4). Discard cotter pin.

TA702025