TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 257 of 462

4-159

TM 9-2330-238-14

4-70. FUEL LINES AND ELECTRICAL FUEL PUMP REPLACEMENT (Con’t).

6.

Remove fuel pump elbow (11 ) from fuel pump (12). Remove two screws (13) and fuel pump.

electrical lead from fuel pump.

7.

Loosen tube nut (19) and remove tube (18) from heater (l).

I

b.

INSTALLATION (M313, M447, M447C, AND M750) I

Disconnect

1.

2.

3.

4.

NOTE

For fuel pump Installation only perform steps 2 through 4.

Position tube (18) on heater (1) and tighten tube nut (19).

Connect electrical lead on fuel pump (12).

Position fuel pump (12) in place on mounting bracket and secure with two screws (13).

Install fuel pump elbow (11) in fuel pump (1 2), Position tube(14) and nonmetallic conduit(15) on heater (1) and

fuel pump elbow. Tighten tube nuts (5).

TA702034