TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 258 of 462

TM 9-2330-238-14

4-70. FUEL LINES AND ELECTRICAL FUEL PUMP REPLACEMENT (Con’t).

5.

Install two loop clamps (17) on tubes (14 and 18) and secure with three screws (16).

6.

Install fuel pump shut-off cock (1O) in fuel pump (12). Position tube (8) and nonmetallic conduit (9) on fuel pump

shut-off cock and tube tee (6) and tighten tube nuts (7).

7.

Position tube (4) on fuel tank elbow (2) and tube tee (6) and tighten two tube nuts (3).

c.

REMOVAL (M749 SOUTHWEST MODEL

VRP, SERIAL NUMBERS

V001 THROUGH V356)

NOTE

For fuel pump removal only perform steps 6 through 9.

1.

Remove screw (40) and two loop clamps (41 ) from fuel pump electrical connectors (39) and tube (23).

Disconnect fuel pump electrical connectors.

2.

Loosen two tube nuts (20) and remove tube (21) from fuel shut-off valve (42) and fuel tank.

3.

Loosen two tube nuts (22) and remove tube (23) from fuel shut-off valve (42) and tube tee (26).

TA702035

4-160