TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

  TM-9-2330-238-14 - Page 267 of 462

TM 9-2330-238-14
4-71. FUEL TANK REPLACEMENT (Con’t).
6.
Remove eight screws (9), filler neck (8), and gasket (26) from fuel tank (15). Discard gasket.
7.
Remove 12 screws (10), access cover (11), gasket (12), and tube (14) from fuel tank (15). Discard gasket.
8.
Loosen tube nut (13) and remove tube (14) from access cover (11).
9.
Remove draincock (24) and bushing (25) from fuel tank (15).
10.
Remove four screws (18), fuel gage (16), and gasket (17) from fuel tank (15). Discard gasket.
b.
INSTALLATION (M313, M447, M447C, AND M750)
1.
Position new gasket (17) and fuel gage (16) in fuel tank (15) and secure with four screws (18).
2.
Install bushing (25) and draincock (24) in fuel tank (1 5).
3.
Position tube (14) on underside of access cover (11) and tighten tube nut (13).
4.
Position new gasket (12) and access cover (11) on fuel tank (15) and secure with 12 screws (10).
5.
Position new gasket (26) and filler neck (8) on fuel tank (15) and secure with eight screws (9).
6.
Position rubber hose (6) on end of filler neck (8) and secure with inner clamp (5).
TA702042
4-169


Back to Top