TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 271 of 462

TM 9-2330-238-14

4-71. FUEL TANK REPLACEMENT (Con’t).

3.

Carefully position fuel tank (49), rear support (60), and front support (44) on chassis and secure with four screws

(48), new Iockwashers (47), and nuts (45).

4,

Install pipe nipple (50), elbow (51), pipe nipple (56), elbow (59), pipe nipple (58), and filler opening cap (57) on

fuel tank (49).

5.

Install pipe clamp (54) on pipe nipple (56) and secure with two screws (55), new Iockwashers (53), and nuts (52).

g .

REMOVAL (M749 CONVERTO MODEL 8929)

1.

Remove filler cap (62) and gasket (63) from filler neck (81).

2.

Remove screw (86) and nut (82) from clamp (85). Remove two screws (84), Iockwashers (83), and clamp from

filler neck (81). Discard Iockwashers

3.

Remove filler neck (81) from fuel tank (80).

4.

Remove two screws (70), Iockwashers (71), and nuts (72) from fuel tank shield (73) and frame assembly (69).

Discard Iockwashers.

TA702046

4-173