TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 274 of 462

TM 9-2330-238-14

4-72. EXHAUST SYSTEM REPLACEMENT.

This Task Covers:

a.

Removal (M313)

Removal (M749 Southwest Model VRP)

b.

Installation (M313)

Installation (M749 Southwest Model VRP)

c.

Removal (M447 M447C, and M750)

g.

Removal (M749 Converto Model 8929)

d.

Installation (M447, M447C, and M750)

h.

Installation (M749 Converto Model 8929)

Initial Setup:

Materials/Parts:

Materials/Parts (Con’t) :

●

M313

●

M749 Converto Model 8929

– One seal

– Four seals

– Six Iockwashers

– Twenty Iockwashers

●

M447, M447C, and M750

–Two self-locking nuts

Tools/Test Equipment:

– Four preformed packings

– Sixteen Iockwashers

. General mechanic’s tool kit

• M749 Southwest Model VRP

– One Iockwasher

WARNING

Exhaust system may be hot. Allow exhaust system to cool before replacing. Failure to

follow this warning can result in serious burns to personnel.

a.

REMOVAL (M313)

1.

2.

3.

4.

5.

Remove eight screws (5) from two clamps (6) on

exhaust pipe (3) and bonnet.

Remove exhaust pipe (3) and two clamps (6) from

exhaust pipe (7) and bonnet.

Remove two screws (4), Iockwashers (2), nuts (1),

and clamps (6) from exhaust pipe (3). Discard

Iockwashers.

Remove four screws (10), Iockwashers (9), and

seal (8) from bonnet. Discard seal and lock-

washers.

Remove exhaust pipe (7) from heater.

TA702048

4-176