TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

  TM-9-2330-238-14 - Page 391 of 462

TM 9-2330-238-14
5-31. BONNET SIDE DOOR REPLACEMENT (M313, M447, M447C, M749, AND M750)
(Con’t).
3.
Inspect seal (2), seal strip (3), rubber strip, and gasket. If defective, drill out rivets (1 or 6) as required and
replace.
4.
Inspect rivet nuts for damage or stripped threads. If defective, drill out and replace as required.
I c.
INSTALLATION I
1.
Position hinge (14), rubber strip (11), gasket (4), and door assembly (5) in place and install screws (12) and new
Iockwashers (13) to secure door assembly.
NOTE
M313, M447, M447C, and M750, perform step 2. M749, perform step 3.
2.
Close door assembly (5) and install two screws (10), new Iockwashers (9), and grommets (8) in rivet nuts (7).
3.
Close door assembly (5) and install two screws (10) and new Iockwashers (9).
5-89


Back to Top