TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 390 of 462

TM 9-2330-238-14

5-31. BONNET SIDE DOOR REPLACEMENT (M313, M447, M447C, M749, AND M750).

This Task Covers:

a.

Removal

c.

Installation

b.

Cleaning and Inspection

Initial Setup:

Materials/Parts:

Tools/Test Equipment:

●

Two Iockwashers

●

General mechanic’s tool kit

Personnel Required:

Two

NOTE

Use this task for replacement of the left and right bonnet side doors. Quantities of parts

may vary between models. Right side of M447, M447C, and M750 is shown.

I

a.

REMOVAL I

NOTE

M313, M447, M447C, and M750, perform step 1. M749, perform step 2.

1.

2.

3.

Remove two screws (10), Iockwashers (9), and grommets (8) from rivet nuts (7) and door assembly (5). Discard

Iockwashers.

Remove two screws (10) and Iockwashers (9) from door assembly (5). Discard Iockwashers.

Remove screws (12) and Iockwashers (13) from hinge (14), rubber strip (11), and gasket (4), and remove door

assembly (5). Discard Iockwashers.

b.

CLEANING AND INSPECTION

1.

Clean door assembly with steam or water.

2.

Inspect door assembly for cracks, bends, or breaks.

TA702113

5-88