TM-9-2330-267-14-P

TRAILER, TANK, WATER: 400 GALLON, 1-1/2 TON, 2 WHEEL M149, M149A1 AND M149A2

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

JULY 1991

TM-9-2330-267-14-P - Page 109 of 354

TM 9-2330-267-14&P

4-33. MASTER CYLINDER REPLACEMENT (Con’t).

c.

INSTALLATION

1.

Replace identification plate (17) if damaged or missing.

2.

Install spacer ring (10), filler cap (11), and vent tube (5) on master cylinder (12).

3.

Install hose (7) on vent tube (5) with clamp (6).

NOTE

Lockwashers are not used when installing bracket on M149.

4.

Position bracket (2) on frame crossmember and install three screws (1), new Iockwashers (3), and nuts (4).

5.

Install boot (16) on master cylinder (12).

6.

Position airbrake chamber (15) and master cylinder (12) on bracket (2) and install three new Iockwashers(14)

and nuts (13).

7.

Install adapter (9) and tube assembly (8) on master cylinder (12).

FOLLOW-ON TASKS:

. Service master cylinder according to Lubrication Instructions (Chapter 3, Section l).

l Bleed brakes (para 4-36).

4-59