TM-9-2330-267-14-P

TRAILER, TANK, WATER: 400 GALLON, 1-1/2 TON, 2 WHEEL M149, M149A1 AND M149A2

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

JULY 1991

TM-9-2330-267-14-P - Page 100 of 354

TM 9-2330-267-14&P

4-31. HANDBRAKE CABLE REPLACEMENT.

This Task Covers:

a.

Removal

c.

Adjustment

b.

Installation

Initial Setup:

Equipment Conditions:

l Hub and brakedrum

Tools/Test Equipment:

l General mechanic’s

Materials/Parts:

removed (para 4-45).

l One cotter pin

l Five Iockwashers

tool kit

WARNING

If trailer Is not coupled to towing vehicle, ensure that wheels are securely chocked.

Failure to do so may cause trailer to roll, resulting In injury to personnel or damage to

equipment.

NOTE

There are two handbrake cables on the trailers. Only the left side is shown here.

a. REMOVA L

1.

Disconnect handbrake cable (3) from brake lever (2).

2.

Remove two nuts (4), Iockwashers (5), access cover (7), and guide bracket (6) from backing plate (l). Discard

Iockwashers.

3.

Pull handbrake cable (3) out from backing plat (1).

TA507021

4-50