TM-9-2330-267-14-P

TRAILER, TANK, WATER: 400 GALLON, 1-1/2 TON, 2 WHEEL M149, M149A1 AND M149A2

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

JULY 1991

TM-9-2330-267-14-P - Page 101 of 354

TM 9-2330-267-14&P

4-31. HANDBRAKE CABLE REPLACEMENT (Con’t).

4.

Remove cotter pin (13), Iockwasher (14), straight-headed pin (15), and disconnect clevis (11) from handbrake

lever (12). Discard cotter pin and Iockwasher.

5.

Remove two bolts (18), Iockwashers (16), nuts (9), and bracket (17) from frame crossmember. Discard

Iockwashers.

6.

Remove spring (8) from handbrake cables (3).

7.

Remove handbrake cable (3) from trailer

8.

Remove clevis (11) and nut (10) from handbrake cable (3).

b .

INSTALLATION

1.

Install nut (10) and clevis (11) on handbrake cable (3).

2.

Position handbrake cable (3) on trailer frame assembly. Install spring (8) on handbrake cables (3).

3.

Position handbrake cable (3) on frame crossmember and install two bolts (18), bracket (17), two new

Iockwashers (16), and nuts (9).

4.

Connect clevis (11) to handbrake lever (12) with straight-headed pin (15), new Iockwasher (14), and new cotter

pin (13).

5.

Insert handbrake cable (3) in backing plate (1).

6.

Install two nuts (4), new lockwashers (5), access cover (7), and guide bracket (6) on backing plate (1).

7.

Connect handbrake cable (3) to brake lever (2).

TA507022

4-51