TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 180 of 350

TM 9-2330-324-14&P

0038 00-2

BLEEDING BRAKE SYSTEM—Continued

0038 00

PRESSURE BLEEDING—Continued

2.

Install one end of bleeder hose (1) to driver’s side (left) upper wheel cylinder bleeder fitting (2) and

other end of hose in clean container (3).

2

1

3

3.

Remove two screws (6) and cover (5).

CAUTION

Dirt, water, or grease will contaminate brake fluid, causing brake system

damage. Clean exterior of master cylinder (8) and filler cap (7) before

removing cap.

4.

Remove filler cap (7) from master cylinder (8).

5.

Install brake bleeder interface fitting (4) on master cylinder (8).

5

6

4

8

7