TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 230 of 350

TM 9-2330-324-14&P

0052 00-2

AXLE REPLACEMENT—Continued

0052 00

REMOVAL—Continued

4.

Loosen two nuts (6) and remove handbrake cable (3) from guide bracket (5) on backing plate (10).

NOTE

A suitable container should be used to catch any draining brake fluid.

Ensure that all spills are cleaned up.

5.

Loosen nut (7) and disconnect tube (4) from connector (9).

6.

Remove 12 nuts (11), lockwashers (12), screws (8), and backing plate (10) from axle (2). Discard

lockwashers.

7.

Repeat steps 3 through 6 on opposite end of axle (2).

8

12

11

2

6

3

5

6

10

4

7

9

8.

Remove nut (13), lockwasher (14), clamp (15), nut (18), lockwasher (17), connector (16), and two

tubes (4) from axle (2). Discard lockwashers.

18

17

15

14

2

13

4

16

4