TM 9-2330-324-14&P
0053 00-1
BRAKEDRUM REPAIR
0053 00
THIS WP COVERS:
Inspection, Repair
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Direct Support and General Support
Brakedrum Lathe
Dial Indicator
Equipment Conditions
Inside Micrometer
Hub and Brakedrum Removed (WP 0039 00)
Tool Kit, General Mechanic’s
INSPECTION
WARNING
Do not handle
brakeshoes, brakedrums, or other brake components
unless area has been properly cleaned. There may be hazardous dust o n
these components which can be dangerous if you touch it or breathe it.
Wear an approved filter mask and gloves. Never use compressed air or a
dry brush to clean brake components. Dust may be removed using an
industrial-type
vacuum cleaner. Clean
dust or mud away from brake
components
with water and a wet, soft cloth. Failure to follow this
warning may result in serious illness or death.
1.
Inspect stud holes (2) for cracks (3). Discard brakedrum (1) if cracks are present.
3
2
1