TM-9-2330-331-14-P

SEMITRAILER, FLATBED: BREAKBULK/CONTAINER TRANSPORTER, 34 TON, M872A4

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TM-9-2330-331-14-P - Page 107 of 472

TM 9-2330-331-14&P

0015 00

Table 3.

Operator/Crew PMCS - Continued

ITEM

MAN-

ITEM TO BE

EQUIPMENT

NO.

INTERVAL HOUR

CHECKED OR

SERVICED

PROCEDURE

NOT READY/

AVAILABLE IF:

25

After

N/A

Semitrailer

Cleanliness

After operation, especially in mud, salt

environment, or fording conditions, flush

exposed area of axles, axle ends,

suspension, landing gear, underside/

topside of semitrailer and stowage box

with clean, low-pressure water, if mission

permits.

a. Clean and lubricate all parts as

specified in the WP 0022 00 to make

sure water/debris is flushed out of

system.

b. Check all electrical connections for

corrosion and security.

c. Make sure all painted surfaces are

touched up where necessary to

prevent rust.

NOTE

Mission requirements, urgency, safety,

and common sense should be

considered in determining NMC status

of semitrailer.

26

Weekly

.10

Wheels

Check all wheels for cracks, between

and around stud holes and hand holds.

Check all wheels for rust streaks and

grease stains.

Cracks or leakage

are evident. Notify

Organizational

Maintenance.

27

Monthly

.10

Frame and

Decking

Perform a visual inspection of semitrailer

for evidence of corrosion and condition of

deck wood. Visually check all welds for

rust and cracks. Notify Organizational

Maintenance if corrosion or deck damage

is evident.

END OF WORK PACKAGE

0015 00-11/12 Blank