TM 9-2330-331-14&P
0015 00
Table 3.
Operator/Crew PMCS - Continued
ITEM
MAN-
ITEM TO BE
EQUIPMENT
NO.
INTERVAL HOUR
CHECKED OR
SERVICED
PROCEDURE
NOT READY/
AVAILABLE IF:
2
Before
.25
Kingpin
a. Visually inspect kingpin for obvious
Kingpin is damaged
damage and wear.
Make sure kingpin
or shows obvious
and coupler plate are greased per
wear.
WP 0022 00 if required for prime mover.
.25
b. Visually inspect coupler plate for
Coupler plate is
obvious damage, bowing, and cracked
bowed or welds
welds.
are cracked.
.25
c. Check to make sure coupler plate
Coupler plate drain
drain holes are not plugged.
holes are plugged.
.15
d. Check for loose or missing nuts and
Nuts and bolts are
bolts.
loose or missing.
3
Before
.10
Voltage
Visually check for damage.
Receptacles are
Receptacles
damaged.
4
Before
.10
Gladhands
Inspect gladhands for damage. Gladhands Gladhands are
are missing, worn/cracked seals, and
damaged, seals
missing hardware.
worn/cracked or
missing, or missing
hardware.
NOTE
•
Check for corroded or loose
plug-in connectors. Make sure
there is no debris between plug
and connector and then make
sure
that plug-in is seated.
•
Mission requirements,
urgency, safety, and common
sense should be considered in
determining NMC status of the
semitrailer.
0015 00-2