TM-9-2330-331-14-P

SEMITRAILER, FLATBED: BREAKBULK/CONTAINER TRANSPORTER, 34 TON, M872A4

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TM-9-2330-331-14-P - Page 125 of 472

TM 9-2330-331-14&P

0019 00

Table 4.

Organizational PMCS

ITEM

MAN-

ITEM TO BE

EQUIPMENT

NO.

INTERVAL HOUR

CHECKED OR

SERVICED

PROCEDURE

NOT READY/

AVAILABLE IF:

NOTE

• Perform Operator/Crew PMCS

prior to, or in conjunction with,

Organizational PMCS if there is

a delay between daily operation

of the equipment and the

Organizational PMCS or regular

operator is not assisting/

participating.

• Clean axle and suspension

system with low-pressure water

and fiber brush to allow for

careful inspection.

•

For the first 1,000 miles:

1

Monthly

.50

Suspension

Torque suspension nuts to the

Torque service

Initial Torque

following in-service dry torque values:

requirements/

schedule are not

met. NMC if nuts,

bolts are damaged.

1-5/16”-12 UNF 660 lb-ft (895 N•m)

7/8”-14 UNF

460 lb-ft (624 N•m)

3/4”-16 UNF

300 lb-ft (407 N•m)

5/8”-18 UNF

180 lb-ft (244 N•m)

NOTE

New replacement installations/

hardware should have wet (oiled)

fasteners. The following wet

torque values apply:

1-5/16”-12 UNF 600 lb-ft (814 N•m)

7/8”-14 UNF

350 lb-ft (474 N•m)

3/4”-16 UNF

220 lb-ft (298 N•m)

5/8”-18 UNF

130 lb-ft (176 N•m)

0019 00-3