TM 9-2330-331-14&P
0019 00
Table 4.
Organizational PMCS - Continued
ITEM
MAN-
ITEM TO BE
EQUIPMENT
NO.
INTERVAL HOUR
CHECKED OR
SERVICED
PROCEDURE
NOT READY/
AVAILABLE IF:
CAUTION
•
Do not use air or electric
tools to adjust ASAs.
•
Initial adjusting procedures
start with measurements not
tear-down.
NOTE
This should be checked every
6,000 miles or semiannually,
whichever period is shorter.
16
Semi-
.25
Automatic Slack
a. Check for any binding, broken, worn
Binding, wear,
Annually
Adjusters (ASAs) or loose parts, missing hardware,
loose parts,
evidence of an out-of-adjustment
missing hardware,
condition, worn clutch, and release
out-of-adjustment
action.
conditions are
evident.
b. Lubricate according to WP 0022 00-3.
NOTE
This should be checked every
12,000 miles or annually,
whichever period is shorter.
17
Annually
.50
Axles
Check axles for proper alignment
Axles are not in
(WP 0071 00-3) . If suspension is
alignment.
damaged or axles are out of alignment,
notify Direct Support maintenance.
18
Annually
.10
Twist Locks
Lubricate according to WP 0022 00-3.
0019 00-11