TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT BLINKS FOURTEEN TIMES-Continued
0040 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Blinks Fourteen Times.
Change 1
0040 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 8-14 VDC present at ABS
ECU power/diagnostic
connector pin 3?
No.
Go to (Indication/Condition
3).
1.
Set multimeter to VDC.
Yes.
Go to (Indication/Condition
2).
2.
Disconnect ABS ECU
power/diagnostic cable
connector from ABS ECU.
3.
Connect positive (+) probe
of multimeter to ABS ECU
power/diagnostic cable
connector pin 3.
4.
Connect negative (-) probe
of multimeter to a known
good ground.
5.
Start engine on towing
vehicle and note reading on
multimeter.