TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT BLINKS FOURTEEN TIMES-Continued
0040 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Blinks Fourteen Times - Continued.
0040 00-3
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
2.
Is continuity present from
ABS ECU Power/Diagnostic
cable connector pin 4 to a
known good ground?
No.
Go to (Indication/Condition
7).
1.
Set multimeter to ohms.
Yes.
Replace ABS ECU (WP 0071
00).
2.
Connect positive (+) probe
of multimeter to ABS ECU
Power/Diagnostic cable
connector pin 4.
3.
Connect negative (-) probe
of multimeter to a known
good ground and note
reading on multimeter.