TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT BLINKS FOURTEEN TIMES-Continued
0040 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Blinks Fourteen Times - Continued.
Change 1
0040 00-6
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
5.
Is 18-30 VDC present at 24
VDC Intervehicular cable
connector pin K?
No.
Replace 24 VDC
Intervehicular Cable (WP
0062 00).
1.
Set multimeter to VDC.
Yes.
Go to (Indication/Condition
6).
2.
Disconnect intervehicular
cable from voltage converter
box.
3.
Connect positive (+) probe
of multimeter to 24 VDC
Intervehicular cable
connector pin K.
4.
Connect negative (-) probe
of multimeter to a known
good ground.
5.
Start engine of towing
vehicle and note reading on
multimeter.