TM-9-2330-334-13-P
FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1
TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
DECEMBER 2013
CHANGE 1
TM-9-2330-334-13-P - Page 315 of 1184
TM 9-2330-334-13&P
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - Continued
0052 00
0052 00-7
Change 1
LUBRICATION SERVICE INTERVALS - NORMAL CONDITIONS - Continued
Table 3.
Cleaning Agents.
Specification
Type
P/N WD-40
Corrosion Preventive Compound
Table 4.
Cleaning Agent/Temperature.
EXPECTED TEMPERATURES*
DESCRIPTION
CAPACITY
Above +15°F
(Above -9°C)
+15°F to -15°F
(-9°C to -26°C)
-15°F to -50°F
(-26°C to -46°C)
All metal parts as
required.
A/R
Corrosion Preventive Compound
*For arctic operation refer to FM 9-207, Operation and Maintenance of Ordnance Materiel in Cold Weather
(0 degrees to minus 65
°
F).
LUBRICATION SERVICE INTERVALS - UNUSUAL CONDITIONS
The trailer will require extra service and care when you operate under unusual conditions. High or low
temperatures, long periods of hard use, or continued use in sand, water, mud, or snow will break down the
lubricant requiring you to add or change lubricant more often.
CLEANING AND LUBRICATION
WARNING
•
Solvent, Cleaning Compound (MIL-PRF-680) is TOXIC and flammable.
Wear
protective goggles and gloves; use only in well-ventilated area; avoid contact
with skin, eyes, and clothes, and do not breath vapors.
Keep away from heat or
flame.
Never smoke when using Cleaning Solvent; the flashpoint for Type I
Cleaning Solvent is 100°F (38°C) and for Type II is 138°F (50°C). When not
using MIL-PRF-680 solvents, ensure MIL-PRF-680 solvent container is sealed.
Store, handle, and dispose of unused and spent solvents in accordance with
local procedures and plans.
Failure to comply may result in serious injury or
death to personnel.
•
If personnel become dizzy while using Dry Cleaning Solvent, immediately get
fresh air and medical help.
If Dry Cleaning Solvent contacts skin or clothes,
flush with cold water.
If Dry Cleaning Solvent contacts eyes, immediately flush
eyes with water and get medical attention.
Failure to comply may result in
serious injury or death to personnel.
Dirt, grease, oil, and debris only get in the way and may cover up a serious problem.
Use Dry Cleaning
Solvent on metal surfaces where directed.
Back to Top
