TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 534 of 1184

TM 9-2330-334-13&P

BRAKES REPLACEMENT/ADJUSTMENT - Continued

0069 00

0069 00-8

INSPECTION - Continued

NOTE

Over time, a ridge will form on the outer edge of the brake shoes.

This is normal and

does not affect brake shoe serviceability.

4.

Inspect brake shoes for OUT-OF-SERVICE and IN-SERVICE criteria as shown in Table 1, Brake Shoe

Service Criteria.

Table 1.

Brake Shoe Service Criteria.

OUT-OF-SERVICE

IN-SERVICE

Cracks or voids that exceed 1/16 in. (0.16 cm) in

width.

Cracks that exceed 1-1/2 in. (3.75 cm) in length.

Vertical or horizontal cracks in lining edge not

exceeding 1/16 in. (0.16 cm) in width or not

exceeding 1-1/2 in. (3.75 cm) in length.

Portion of lining missing that exposes a fastening

device, or worn to the point that a fastening device

is exposed.

Corner segment missing with no fastening device

(rivet or bolt) exposed.

Cracks across the lining face that extend through the

lining edges.

Surface cracks in lining face that can extend from

hole to hole.

Pitting and material erosion on the lining face.