TM 9-2330-334-13&P
BRAKES REPLACEMENT/ADJUSTMENT - Continued
0069 00
0069 00-17
ADJUSTMENT – Continued
NOTE
If the following step is in doubt, use a 0.010 in. feeler gage.
It should not fit between
the lining and wheel drum.
8.
Verify brake lining (17) is contacting wheel drum (6).
9.
If brake lining (17) doesn’t contact wheel drum (6), re-adjust slack adjuster per steps (1) through (4).
10.
Release air pressure from brakes (WP 0020 00, TM 9-2320-392-10-1).
11.
Verify all brakes release properly.