TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 804 of 1184

TM 9-2330-334-13&P

SHUTTLE AND GUIDE BRACKET REPLACEMENT - Continued

0100 00

0100 00-4

REMOVAL - Continued

NOTE

•

If shuttle cannot be moved by hand, reinstall hook from winch and perform previous

two steps until alignment is achieved.

•

LH and RH front and rear roller pins are removed the same way.

Front LH roller pin

is shown.

13.

Align roller pin (15) with service hole (16) on rail (17).

WARNING

Retaining rings are under tension and can act as projectiles when released,

causing severe eye injury.

Use care when removing retaining rings.

Failure to

comply may result in injury to personnel.

14.

Remove retaining ring (18) from roller pin (15).

15.

Perform previous two steps on remaining roller pins.

NOTE

If shuttle cannot be moved by hand, move winch to rear of trailer, reinstall hook and

perform steps 5 through 10.

16.

Push shuttle (6) back approximately 3 feet (91 cm) for access to four bolts (19).

17.

Remove four bolts (19) from shuttle (6).