TM 9-2330-334-13&P
SHUTTLE AND GUIDE BRACKET REPLACEMENT - Continued
0100 00
0100 00-5
REMOVAL - Continued
NOTE
If shuttle cannot be moved by hand, reinstall winch to front of trailer, reinstall hook and
perform steps 5 through 10.
18.
Align roller pin (15) with service hole (16) on rail (17).
WARNING
Shuttle weighs approximately 550 lbs (250 kgs).
Attach a suitable lifting
device prior to removal.
Failure to comply may result in serious injury to
personnel or damage to equipment.
NOTE
LH and RH front and rear roller pins are removed the same way.
Front LH roller pin is
shown.
19.
Push roller pin (15) through roller (20) and shuttle (6).
20.
Perform previous step on remaining roller pins.
21.
Remove four grease fittings (21) from roller pins (15).