TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 810 of 1184

TM 9-2330-334-13&P

SHUTTLE AND GUIDE BRACKET REPLACEMENT - Continued

0100 00

0100 00-10

INSTALLATION - Continued

9.

Install four retaining rings (18) on roller pins (15).

10.

Align roller pin (15) with service hole (16) on rail (17).

11.

Install four grease fittings (21) in roller pins (15).

WARNING

Shuttle weighs approximately 550 lbs (250 kgs).

Attach a suitable lifting

device prior to installation.

Failure to comply may result in serious injury to

personnel or damage to equipment.

NOTE

•

LH and RH front and rear roller pins are installed the same way.

Front LH roller pin

is shown.

•

Install front two roller pins prior to rear for ease of installation.

12.

Push roller pin (15) through roller (20) and shuttle (6).

13.

Perform previous step on remaining roller pins.