TM 9-2330-334-13&P
SHUTTLE TWIST LOCK REPLACEMENT - CONTINUED
0101 00
Change 1
0101 00-2
REMOVAL
NOTE
LH and RH twist locks are removed the same way.
LH side is shown.
1.
Remove retaining pin (1) from handle (2).
2.
Position handle (2) for access to self-locking nut (3).
3.
Remove self-locking nut (3) and bolt (4) from swivel arm (5) and pivot lock (6).
Discard self-locking
nut.
4.
Remove pivot lock (6) from swivel arm (5) and block (7).
NOTE
Note orientation of handle, swivel, and bolt prior to removal.
5.
Remove cotter pin (11), nut (8), bolt (9) and handle (2) from swivel arm (5).
Discard cotter pin.
6.
Remove swivel arm (5) and block (7) from shuttle (10).
END OF TASK