TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 817 of 1184

TM 9-2330-334-13&P

SHUTTLE TWIST LOCK REPLACEMENT - CONTINUED

0101 00

0101 00-3/4 Blank

Change 1

INSTALLATION

NOTE

LH and RH twist locks are installed the same way.

LH side is shown.

1.

Position block (7) and swivel arm (5) in shuttle (10).

NOTE

Tighten nut and then loosen one half turn to allow joint to pivot and insert cotter pin.

2.

Install handle (2) bolt (9), nut (8), and new cotter pin (11) on swivel arm (5).

3.

Install pivot lock (6) in swivel arm (5) and block (7).

4.

Position bolt (4) through swivel arm (5) and pivot lock (6) with self-locking nuts (3).

5.

Tighten self-locking nut (3) to 150-170 lb-ft (203-258 N·m).

6.

Install retaining pin (1) in handle (2).

END OF TASK

END OF WORK PACKAGE